HMG-ES Series_Die Spotting Press_Products

HMG-ES Series

One-way Type
Four Hydraulic Cylinders
One-touch Operation
Four Column design
Outstanding Precision
Good Ergonomics
Parallelism Measuring Function

Parameter

<-- Scroll View -->

Model	Max. Clamping Force(Kn)	Platen Dimension(mm)	Max. Load Capacity on Lower Platen (T)	Max. Load Capacity on Upper Platen (T)
HMG-70ES1008	700	1000*800	4	2..5
HMG-120ES1411	1200	1400*1100	8	4
HMG-160ES 1613	1600	1600*1300	16	8
HMG-200ES 1815	2000	1800*1500	20	10
HMG-280ES2016	2800	2000*1600	25	15
HMG-320ES2218	3200	2200*1800	36	20
HMG-350ES2520	3500	2500*2000	42	26
HMG-400ES3020	4000	3000*2000	50	26
HMG-500ES3020	5000	3000*2000	60	30
HMG-500ES3025	5000	3000*2500	60	30
HMG-600ES3525	5000/6000	3500*2500	70	32
HMG-600ES4025	6000	4000*2500	80	40
HMG-600ES4030	6000	4000*3000	90	50
HMG-800ES4235	8000	4200*3500	160	80
HMG-1000ES5042	10000	5000*4200	210	110
HMG-1200ES6548	12000	6500*4800	300	150

*Max. clamping force and platen dimension can be customized

Standard left side
Optional right side
Standard one way
Optional opposite way

Why Die Flipper

It allows you to conveniently match all the parts of the mould in more comfortable position. Check and finish the die at one place in more ergonomic position.
No more dangerous ways (such as cranes and forklift trucks) to handle the molds.
No more spotting on injection molding machines, which are costly and difficult to access.
Optimal accessibility and ergonomics by means of swiveling and tilting plates.
Low operating and maintenance costs.
High Flexibility.
Considerable reduction of correction grinding through reproducibility.
Trials of hydraulic slides, auxiliary cylinders and ejectors can also be done in single operation.

Why SXKH

Rotary Table

Lower Platen has rotary function from 0° to 120° to 240° or 0° to 180°. This function is mainly used for the tryout of two-color and three-color molds.
Machine can be equipped with electric permanent magnet chuck to furtherly ensure the precision of multi-color molds and improve the mold tryout efficiency.
The lower platen can be tilted both front and back by 70°

SXKH two way type die spotting press has the optional function of 70° tilting front and back, for the lower platen.

This function enables lower platen to tilt by 70° once lower platen move out. Thus operator can repair mold without bend down, which greatly eases the lumbar muscle strain injury of operators.
Siemens PLC System

SXKH is the first die spotting press manufacturer to use Siemens System in Asia, achieving digital control by PLC.
*Equipped with the PLC system
*Remote control module is optional
*Control and monitor press
*All the parameters can be settled and saved freely
*Memory function available-Mold database
*A wide variety of signal modules for input and output
Hydraulic Servo System

*Servo System provide more economy way to operate Spotting press(60% energy saving. Provide much better stable holding force.
*Provide much better stable holding force.
Pneumatic-Mechanical Locks for Moving Base

*Two safety locks ensure the upper platen can be locked at any position when upper platen goes up or down. This is a mandatory device specified by EC rules.
Electronic Moving Base Parallelism Checking System

There are four encoders at each tie bar to measure parallelism in real time. The touch screen shows the state of encoders working continuously. With the low pressure mold protection function, the mold can be prevented damage in the case of improper operation by employees.
QDC-Quick Die Change System(Optional)

We will provide additional two way to reduce Mold Clamping time

*Electricity permanent Magnetic working table
*Hydraulic clampers

Download Catalog